rustic-fishing-reel-door-pullsrustic-fishing-reel-door-pulls

Door Pulls – LLBean – Castello di Fishing Lodge – HH058A

Description

Door Pulls – LLBean – Castello di Fishing Lodge

A blacksmith is a person who creates objects from iron or steel by forging the metal; i.e., by using tools to hammer, bend, cut, and otherwise shape it in its non-liquid form. Usually the metal is heated until it glows red or orange as part of the forging process. Blacksmiths produce things like wrought iron gates, grills, railings, light fixtures, furniture, sculpture, tools, agricultural implements, decorative and religious items, cooking utensils, horse shoes and weapons.
A blacksmith's striker is an assistant (frequently an apprentice), whose job it is to swing a large sledge hammer in heavy forging operations, as directed by the blacksmith. In practice, the blacksmith will hold the hot iron at the anvil (with tongs) in one hand, and indicate where the iron is to be struck by tapping it with a small hammer held in the other hand: the striker then delivers a heavy blow with the sledge hammer where indicated.

When iron ore is smelted into usable metal, a certain amount of carbon is usually alloyed with the iron, (charcoal is almost pure carbon). The amount of carbon has extreme effects on the properties of the metal. If the carbon content is over 2%, the metal is called cast iron. Cast iron is so called because it has a relatively low melting point and is easily cast. It is quite brittle however, and therefore not used for blacksmithing. If the carbon content is between 0.25% and 2%, the resulting metal is tool steel, which can be heat treated as discussed above. When the carbon content is below 0.25%, the metal is either "wrought iron" or "mild steel." The terms are never interchangeable. In pre-industrial times, the material of choice for blacksmiths was wrought iron. This iron had a very low carbon content, and also included up to 5% of glassy slag. This slag content made the iron very tough, gave it considerable resistance to rusting, and allowed it to be more easily "forge welded," a process in which the blacksmith permanently joins two pieces of iron, or a piece of iron and a piece of steel, by heating them nearly to a white heat and hammering them together.

Most Designs Used Today Were Conceived Hundreds Of Years Ago By Some Of The Worlds Most Famous Architects And Designers Working For The Aristocracies And The Well To Do Of Their Period.

Many of these architects and designers are as well known as Leonardo da Vinci (renaissance architecture) or Michelangelo,s (baroque architecture) as well as more recently William Morris, John Ruskin (founders of the Arts and Crafts furniture movement in circa 1800 England) Gustave Stickley (founder of the American Arts and Crafts movement in America circa 1900.) Frank Loyd Wright, Charles and Henry Greene to name a few.

Door Pulls – LLBean – Castello di Fishing Lodge Info

  • American hand made solid iron door hardware
  • Hand applied with heat and iron oxide patina finish on all wrought iron products
  • Solid hand forged metalwork hardware - no hollow iron or fake castings
  • Available in any metals types, stain and patina finishes
  • Built in the original craft - not reproduction
  • Order any size or style hardware custom designed for your residential or commercial space
  • Request original art or limited edition custom designed hardware
  • All custom hardware for doors are guaranteed forever - backed by over a century of fine craftsmanship

Blacksmithing is not casting (also known as drop forging or hollow cold roll) or other fast, fake processes. Our fine art custom door pulls are created from labor intensive tried and tested techniques. Each custom pull is fired by coal and anvil hammered into shape by the hands of our master blacksmiths in our American factory in Scottsdale, Arizona, USA. All of our custom door handles are made from solid hand forged wrought iron with a natural patina (we never use faux paint or powder coating). Our custom door hardware will arrive to you virtually maintenance free.

Available in any size, style, and finish, our custom door pulls can be custom fabricated in any design you can dream up. Order from our online catalog of custom door hardware, send in your own drawings or photos, or speak with one of our talented design engineers to get started. We at ArtFactory.com will hand make one-of-a-kind custom door handles just for you.

ArtFactory.com, an American manufacturer of custom door hinges, door straps, wood doors, iron gates, and designer furniture based in Scottsdale, Arizona, and Designs by H.J. Nick, have been designing and building some of the world's finest furnishings, all hand crafted in America, since 1913. Most of our clients want a furnishing that has a big WOW factor and timeless elegance. They all want investment value furnishings that make a proper statement reflecting their personality, or the personality of the environment for which the designer custom furnishings are intended. Our master level craftsmanship ensures your custom wrought iron gates and furnishings will stand the test of time, and are guaranteed forever, backed by over a century of fine craftsmanship.

Door Hardware Custom Built The Old Fashioned Way
"When Everything Made In America Was Built To Last Forever"
And Craftsmen Were Proud To Sign Their Work

Order Any Size Or Style - We Can Help You To Design Your Dream Custom Door Hardware - At No Extra Cost

Reviews

There are no reviews yet.

Be the first to review “Door Pulls – LLBean – Castello di Fishing Lodge – HH058A”

This site uses Akismet to reduce spam. Learn how your comment data is processed.